| Titanium Specifications | |
|---|---|
| ASTM B338 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers. |
| ASTM B862 | This specification covers the requirements for 33 grades of titanium and titanium alloy welded pipe intended for general corrosion resisting and elevated temperature service. |
| ASTM B861 | This specification covers the requirements for 34 grades of titanium and titanium alloy seamless pipe intended for general corrosion resisting and elevated temperature. |
| ASTM B337 | This specification covers 8 grades of seamless and welded titanium pipe intended for general corrosion resisting and elevated temperature service. |
| DIN17861 | Standard provides the technical delivery conditions for the manufacture and supply of Seamless Circular Titanium and Titanium Alloy Tubes |
| ASTM F67 | This specification covers the chemical, mechanical, and metallurgical requirements for four grades of unalloyed titanium used for the manufacture of surgical implants. |
| AMS 4911 | This specification covers a titanium alloy in the form of sheet, strip, and plate. These products have been used typically for parts requiring strength up to 750 °F (399 °C), but usage is not limited to such applications. |
| ASTM B265 | This specification covers annealed titanium and titanium alloy strip, sheet, and plate. |
| ASTM F136 | This specification covers the chemical, mechanical, and metallurgical requirements for wrought annealed titanium-6aluminum-4vanadium ELI (extra low interstitial) alloy (R56401) to be used in the manufacture of surgical implants. |
| ASTM B348 | This specification covers annealed titanium and titanium alloy bars and billets. |
| ASTM B863 | This specification covers annealed titanium and titanium alloy wire. |
| AMS 4928 | This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings, drawn shapes, and stock for forging or flash welded rings. These products have been used typically for parts requiring moderate strength with a maximum service temperature in the 750 to 900 °F (399 to 510 °C) range depending on time at temperature where the product is to be used in the annealed condition, but usage is not limited to such applications. |
| Zirconium Specifications | |
|---|---|
| ASTM B658/B658M | Standard Specification for seamless and welded zirconium and airconium alloy pipe. |
| ASTM B523/B523M | This specification covers two grades of zirconium and zirconium alloy seamless and welded tubes. |
| ASTM B353 | This specification covers seamless and welded wrought zirconium and zirconium-alloy tubes for nuclear application. |
| ASTM B551/B551M | This specification covers 85 grades of zircnium strip, sheet, and plate. |
| Tantalum Specifications | |
|---|---|
| ASTM B521 | This specification covers tantalum and tantalum alloy seamless and welded tubes. |
| ASTM F560 | This specification covers the chemical, mechanical, and metallurgical requirements for unalloyed tantalum plate, sheet, strip, rod, and wire used in the manufacture of surgical implants. |
| ASTM B365 | This specification covers unalloyed and alloyed tantalum rod and wire. |
| ASTM B5708 | This specification covers unalloyed and alloyed tantalum plate, sheet, and strip. |
| Niobium Specifications | |
|---|---|
| ASTM B394 | This specification covers wrought niobium and niobium alloy seamless and welded tubes. |
| ASTM B392 | This specification covers 4 grades of wrought niobium and niobium alloy bar, rod, and wire. |
| ASTM B393 | This specification covers 5 grades of wrought niobium and niobium alloy strip, sheet, and plate. |
| ASTM B655 | This specification covers hafnium alloyed niobium(R04295) bar and wire, |
| Hafnium Specifications | |
|---|---|
| ASTM B737 | This specification covers hot-rolled and/or cold-worked hafnium rod and wire. This specification contains 2 material grades, one sepcifically for nuclear applications (Grade R1) and one for commercial alloying applications (Grade R3). |
| ASTM B776 | This specification covers 2 grades of wrought hanium and hafnium alloy strip, sheet, and plate. One sepcifically for nuclear applications (Grade R1) and one for commercial alloying applications (Grade R3). |
| Specialty Steel Specifications | |
|---|---|
| ASTM A276 | This specification encompasses cold-finished or hot-finished bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. |
| ASTM A479 | This specification includes cold and hot finished stainless steel bars, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels. |
| ASTM A484 | This specification includes wrought stainless steel bars, shapes, forgings, and billets or other semi-finished materials, except wire, for forging. The materials are available in four types of conditions. |
| ASTM A582 | This specification includes cold or hot finished bars, which are suitable for machining processes. This specification includes rounds, squares, and hexagons, from common types of stainless free-machining steels. |
| ASTM B473 | This specification includes nickel alloy bar & wire, which can be produced in a solution-annealed condition, stabilized-annealed condition, or annealed condition. |
| ASTM A213/A213M | This sepcification covers seamless ferritic and austenitic steel boiler, superheater, and hear-exchanger tubes,designated Grade T5, TP304, TP310S, etc. |
| ASTM A790/A790M | This specification covers seamless and straight-seam welded ferritic/austenitic steel pipe intended for general corrosice service, with particular emphasis on resistance to stress corrosion cracking. These steels are susceptible to embrittlement if used for prolonged periods at elevated termperatures. |
| ASTM A789/A789M | Standard specification for seamless and welded ferritic.austenitic stainless steel tubing for general service. |
| ASTM B677 | This specification covers UNS N08925, UNS N08354, and UNS N08926 seamless, cold-worked or hot-finished pipe and tube intended for general corrosive service. |
| ASTM B163 | Standard specification for seamless nickel and nickel alloy condenser and hear exchanger tubes. |
| ASTM A240/A240M | This sepcification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strup for pressure vessels and for general applications including architectural, building, construction, and aesthetic applications. |
| ASTM B625 | This specification covers alloys UNS NO8925, UNSN08031, UNS NO8932, UNS N08926, UNS N08354, UNSN08830, and UNS R20033 plate, sheet, and strip in the annealed temper. |
| ASTM B424 | This specification covers rolled nickel-iron-chromiummolybdenum-copper alloy (UNS N08825, UNS N08221, and UNS N06845) plate, sheet, and strip. |
| ASTM B575 | This specification covers plate, sheet, and strip of low-carbon nickel-chromium-molybdenum alloys (UNS N10276, N06022, N06455, N06035, N06044, UNS N06058, UNS N06059),3 low-carbon nickel-chromium-molybdenumcopper alloy (UNS N06200), low-carbon nickel-molybdenumchromium (UNS N10362), low-carbon nickel-chromiummolybdenum-tantalum alloy (UNS N06210), and low-carbon nickel-chromium-molybdenum-tungsten alloy (UNS N06686), for use in general corrosive service. |
| ASTM A182 | This specification covers forged low alloy and stainless steel piping components for use in pressure systems. Included are flanges, fittings, valves, and similar parts to specified dimensions or to dimensional standards, |
| ASTM A425 | his specification covers nickel-iron-chromiummolybdenum-copper alloy (UNS N08825, UNS N08221, and UNS N06845) in the form of hot-finished and cold-drawn rounds, squares, hexagons, and rectangles. |
| ASTM B574 | This specification covers rod of low-carbon nickelchromium-molybdenum alloys (UNS N10276, N06022, N06035, N06455, N06058, and NO6059), low-carbon nickelmolybdenum-chromium (USN N10362), low-carbon nickelmolybdenum-chromium-tantalum (UNS N06210), low-carbon nickel-chromium-molybdenum-copper alloy (UNS N06200), and low-carbon nickel-chromium-molybdenum-tungsten (UNS N06686), for use in generalcorrosive service. |